News

July 22, 2021

STUD WELDING AND HOW IT WORKS

Stud Welding is a general term for joining a metal stud, or similar part, to a work piece. Welding can be done by a number of welding processes including ARC, Resistance, Friction and Percussion. Of these processes, STUD ARC WELDING utilizes equipment and techniques unique to stud welding. The other processes use conventionally designed equipment with special tooling.

Read now

August 11, 2022

When MIG welding (gasless) of thin section steel which wire is better 0.8mm or 0.9mm?
It may not sound logically correct; this is not necessarily the case. Let us explain why. 0.8mm Gasless Wire & 0.8mm Solid (gas) MIG Wire may be same in size, but they can’t be directly compared to each other
Read now
August 11, 2022

The Inspiration Behind Powermax SYNC
The inspiration for the Hypertherm SYNC product line was largely the result of many, many conversations with industrial metal fabrication shops and other manufacturers all over the world, a process of several years
Read now
August 11, 2022

Prevent & Fix Porosity in Gasless ('MIG') Welding
Porosity is the presence of cavities in the weld metal caused by the freezing in of gas released from the weld pool as it solidifies.
It does not only look terrible, but it also weakens the weld joint significantly
Read now
February 24, 2022

Maximize Productivity & Efficiency with 7 times longer consumable life
The Powermax SYNC™ is designed to get more done. But don’t just hear it from us. Here’s a peek at how one of our early adopters is utilizing and benefitting from using their new Powermax SYNC™ system.
Read now
October 12, 2021

Introducing the revolutionary Powermax SYNC
Powermax SYNC™ series, the next generation of Powermax65®/85/105 systems, is unlike any plasma you’ve seen before. Featuring built-in intelligence and a revolutionary single-piece cartridge consumable, Powermax SYNC simplifies system operation, streamlines consumable inventory, lowers operating costs, and maximises performance.
Read now
July 22, 2021

STUD WELDING AND HOW IT WORKS
Stud Welding is a general term for joining a metal stud, or similar part, to a work piece. Welding can be done by a number of welding processes including ARC, Resistance, Friction and Percussion. Of these processes, STUD ARC WELDING utilizes equipment and techniques unique to stud welding. The other processes use conventionally designed equipment with special tooling.
Read now
April 29, 2021

Working Near Welders
In early 2017, the International Agency for the Research on Cancer (IARC) reclassified welding fume as carcinogenic. These risks apply not only to the welders themselves but also to the non- welders who work in close proximity to them. As...
Read now
April 29, 2021

Practical Guide to Welding Fume Control
There is a critical need to give workplaces clear and practical advice that can help to keep welding fume exposure to an acceptable level.
This guide is based on a simple premise - the health risk posed by welding fume is serious, however, keeping yourself safe can be straightforward.
Consequently, in this guide, we outline the dangers of welding fume and then give you actionable and practical guidance based specifically on the welding industry.
Read now
April 22, 2021

Add a layer of protection in your welding workspace
Electrocution, Burns, Arc-eye & Fumes are just few of the known hazards of welding that is why it has been rated as one of the hazardous occupations globally due to these risks. Welders are at high risk of injuring themselves but some may not know that it also hazardous to the people around and can even damage the surrounding area that is why it is essential that the right safety precautions are taken to protect both employees and workspaces alike.
Read now